Buying Guides

Buying a Pre-Owned Panerai Luminor Marina PAM00111: What to Check

The hand-wound Panerai Luminor Marina PAM00111 changed during production. Here is how to tell early and later examples apart, how it compares with the PAM01312 and PAM03312, and seven checks before you buy one.

In This Article

The Panerai Luminor Marina PAM00111 (often written PAM111) is the hand-wound, 44 mm steel Luminor with a black dial, small seconds at nine o'clock and no date. For many people it is the watch that comes to mind when they hear "Panerai," and it is one of the most common Panerai references on the pre-owned market. The short answer for a buyer: it is a good first Panerai if you are comfortable winding a watch by hand every day or two and you like a large, flat-sided case. What you are really choosing between is early and later examples. The dial construction and movement finishing changed during production, and those details, along with the condition of the case and the paperwork, decide what a particular PAM00111 is worth.

Here is what the reference is, how to tell the generations apart, and what to check on a used one.

What the PAM00111 is

Panerai Luminor Marina PAM00111 at a glance
Introduced 2002
Case 44 mm, stainless steel, about 14.5 mm thick
Lug width 24 mm
Dial Black; painted on early examples, "sandwich" construction later
Functions Hours, minutes, small seconds at 9 o'clock; no date
Movement Panerai calibre OP XI, hand-wound, based on the Unitas 6497-2
Frequency / jewels 21,600 vibrations per hour (3 Hz), 17 jewels
Power reserve About 56 hours
Chronometer COSC-certified
Caseback Sapphire display back
Water resistance rating 300 meters

The PAM00111 is no longer in Panerai's current catalog, so these details come from reference databases and specialist histories: WatchBase's PAM00111 entry, Fratello's guide to Panerai watches of the 2000s and Wound For Life's history of the reference. Published thickness figures range from 14.48 mm to about 15 mm depending on the source and how it was measured. The PAM00111 was a regular production model, not a limited edition. WatchBase lists it as not limited, so treat any listing that calls a PAM00111 "limited" with caution.

Why people buy it

The appeal is simplicity. The dial has large luminous numerals and markers and nothing else, apart from the small seconds. The case carries the Luminor's signature crown guard: a hinged lever that clamps the crown shut against its seal. On the wrist, the 44 mm case, short lugs and wide 24 mm strap make it look and feel bigger than most 40 to 42 mm watches. It is worth trying one on before you buy if you normally wear something smaller.

The movement is the other reason. The OP XI is built on the Unitas 6497-2, a large pocket-watch-sized hand-wound movement that fills the case and is visible through the sapphire back. Panerai added its own regulator and finishing. Because the base design is so widely known, a competent watchmaker can service it without difficulty, and that matters on a watch that may be many years old.

Early or later: how to tell the generations apart

The reference number stayed the same for the whole production run, but two details changed. According to both Wound For Life and Fratello:

  • The dial. Examples from the E, F and G series, made from 2002 to 2005, have a traditional painted dial: the numerals and hour markers are printed on the surface. Examples from after the G series (from 2006 on) have a sandwich dial. That is two plates stacked together, with the numerals and markers cut out of the top plate and luminous material on the lower plate showing through. Under a loupe, or even at an angle in good light, a sandwich dial shows depth at the edge of each numeral. A painted dial looks flat.
  • The movement finishing. Early movements from 2002 to 2005 have "Panerai" engraved repeatedly across the bridges. Later movements have Côtes de Genève (Geneva stripes) instead. You can see this through the display back. Wound For Life notes that the two versions are mechanically the same.

Neither version is "correct." Some collectors seek out the early painted dial. Others prefer the depth of the sandwich dial. What matters is that the dial and movement match each other and the series on the watch's papers. A painted dial on a watch whose papers place it after 2005, or the reverse, deserves a question. It may be a replacement dial from a service, which affects value even when the part is genuine.

Fratello also notes a white-dial sibling, the PAM00113. If you see a white Luminor Marina listed as a PAM00111, check the reference engraved on the caseback.

Where the PAM00111 sits in the Luminor Marina line

Buyers often compare the PAM00111 with Panerai's later steel Luminor Marina models. The key differences are the movement and the date.

  • PAM00111: hand-wound OP XI, about 56 hours of power reserve, no date, sapphire display back.
  • PAM01312: the later steel Luminor Marina 44 mm with Panerai's in-house automatic calibre P.9010, a date window and a three-day power reserve, according to The Watchology's comparison. Its Panerai product page now redirects to the newer model below.
  • PAM03312: Panerai's current steel Luminor Marina 44 mm. Panerai's PAM03312 page lists an automatic P.980 calibre with a three-day power reserve, small seconds and date, water resistance of 50 bar (about 500 meters) and a see-through sapphire caseback.

If you want a date and automatic winding, look at the newer references. If you want the pure no-date dial and the hand-wound ritual, the PAM00111 is the one to buy.

Seven checks before you buy a PAM00111

  1. Confirm the reference and serial. The PAM reference and the individual serial number are engraved on the caseback. Match both to the listing and, if present, to the guarantee card.
  2. Match the dial and movement to the papers. Use the painted-dial and engraved-bridge details above. A mismatch is not automatically a problem, but the seller should be able to explain it.
  3. Inspect the crown guard. Open and close the lever. It should move firmly and lock flat. Look for play in the hinge and for a bent or replaced lever. The crown guard is what keeps the crown sealed, so it matters for water resistance as well as looks.
  4. Look at the case edges. The Luminor case has flat, brushed sides and sharp transitions. Rounded edges and soft corners suggest heavy polishing, which cannot be undone.
  5. Check the lume and dial. Look for uneven color between the numerals, spotting or damage to the luminous material. On a sandwich dial, look for chips at the edges of the cut-outs.
  6. Wind it and time it. Wind the crown fully and listen for a smooth, even feel. A fully wound OP XI should run for roughly two days or more. Because the PAM00111 is a COSC-certified chronometer, it should keep good time when it is in good condition. A watch that stops early or runs badly is probably due for service.
  7. Ask about service and water resistance. A 300-meter rating describes the watch when it was new, not after twenty years of gasket wear. Ask when it was last serviced and for a recent pressure test result. Our water-resistance guide explains what that test can and cannot tell you.

Box, papers and price

PAM00111 examples are offered in every combination: watch only, box only, and complete with box and guarantee card. A dated card helps confirm the age of the watch and backs up the dial and movement details above. It also tends to make the watch easier to resell later. When you compare two examples, compare what comes with each, not just the price. Our article on selling a watch without box and papers explains why paperwork affects value. It focuses on Rolex, but the logic applies to Panerai too.

Buying from Swiss Watches Dot Com

Swiss Watches Dot Com is an independent dealer, not a Panerai boutique or authorized retailer. Every watch we sell is pressure tested before sale and carries our one-year limited warranty, which judges a certified chronometer like the PAM00111 against the COSC standard, and our Lifetime Authenticity Guarantee for the original purchaser. Listings name the exact reference and say whether the box and papers are included.

Browse pre-owned Panerai watches to see which Luminor Marina references are in stock now, or visit our Atlanta showroom to try a 44 mm Luminor on your own wrist. If you already own a Panerai and want to trade or sell it, start with Sell Your Watch.

Ask a Specialist About the Panerai Luminor

Tell us what you are looking for. A specialist can walk you through what is in stock, how references differ and what to expect from a pre-owned example.

Call (770) 584-1378